Standard For Blister Packaging

- Mar 19, 2020-

Standard for blister packaging

Thermoformed products are made of high impact polystyrene (HIPS) sheet, general-purpose polystyrene (GPPS) sheet, biaxially stretched polystyrene (BOPS) sheet, cast polystyrene (CPS) sheet Materials, cast polypropylene (CPP) sheets, polyethylene terephthalate (PET) sheets, etc., are processed into various shapes such as boxes, lids, trays, and other plastics after blistering. product. This standard applies to thermoformed products such as boxes, covers, trays, etc. used in the fields of nutrition, pharmaceuticals, quick-frozen products, food, seafood, vegetables, electronics, daily necessities and other fields of use.

The hygienic indicators of this standard are in accordance with GB13114-1994 "Sanitary Standards for Polyethylene Terephthalate Resins for Food Containers and Packaging Materials" and GB13113-1994 "Polyethylene Terephthalate for Food Containers and Packaging Materials Sanitary Standards for Molded Products ", GB5009.60-2003" Analytical Methods for Hygienic Standards for Polyethylene, Polystyrene and Polypropylene Molded Products for Food Packaging ", GB9689-2003" Polyethylene, Polystyrene, Polypropylene Molded for Food Packaging Product hygiene standards.

Blister packaging Inspection of the packaging defect category of the blister box: the outer packaging box is damaged, deformed, wet, and the label does not match the physical object.

Plastic box RoHS mark Defect category: RoHS material: RoHS mark must be included in the outer packaging and the smallest package after unpacking

缺陷 Blister box assembly defect category: The host, battery, headphones, and charger are packed into the blister box according to the shipping packaging requirements, and then this blister box is packed into a color box and observed to be OK.

缺陷 Blister box drop test defect category: According to the requirements of the finished product shipping package. 1 corner, 3 edges, and 6 sides each fell on the concrete floor / iron plate / tile: Select a corner of the sealing box of the packaging box, and the 3 side edges that lead out from this corner will fall from short to long respectively. They are dropped in ascending order, with a total of 10 drops in each direction.